Kerala PSC Overseer Gr III Civil (Irrigation) (24/2017) Mock Test

1. By what name Ganges is known which it flows through Bangaladesh?

2. Which of the following is Kharif crop?

3. What is known as Kalbaisakhi?

4. When did Indian population touch 100 crores?

5. In which state Joag waterfalls is located?

6. Which plan came into force as passed by Central Govt. on September 2005?

7. R.M.S.A. Scheme belongs to which sector?

8. The Moghul King who led first freedom struggle of 1857

9. In which movement Pochampalli village of A.P. is associated with?

10. In which year Moghul Empire was established?

11. With which movement Savarna Jatha (Upper Caste March) is associated?

12. Name of the protest launched by Ayyankali against Ban on wearing Necklace by Backward people

13. Name of the newspaper owned by Vakkam Abdul Khader Moulavi

14. Who founded Athma Vidya Sangam?

15. Who propagated the religious path Ayyavazhi?

16. What does the yellow ring in the symbol of Olympic games denote?

17. Who won the first gold in Rio Olympics 2016?

18. Who was selected as best Actor of India by the 63rd National Film Award Committee Judges?

19. Who is the Prime Minister of Britain?

20. Who is the and Tourism Minister in Kerala?

21. The stair which is provided to turn through 180° is ____.

22. For site exploration probing method is used up to a maximum depth of _____.

23. The coping provided at the foot of the gable wall is known as a ____.

24. Which of the following saw is used for cutting the wood along the grains?

25. In which of the following directions, the strength of timber is maximum?

26. Glazed tiles are fixed with ____ on the bath room wall.

27. Maximum safe bearing capacity of compacted gravel and moorum is ___ Kn/m².

28. The D.P.C. treatment provide to foundation against gravitational water is _____.

29. Which of the following is not considered as a rusticated joint in stone masonry?

30. What is the name of the moulded wooden strip fixed round a door frame to improve the appearance?

31. Which of the following is a four centred arch?

32. The semi-circular projection which is formed on the edges or sufaces of wood is called _____.

33. What is the name of the movable barrier, secured in an opening?

34. Best type of piles for soft soil having little resistance to the flow of concrete is _____.

35. The porosity of a good building stone should not be greater than ___.

36. For determining the initial setting time by Vicat apparatus, the weight of cement to be taken is ___.

37. Ordinary Portland cement is available in _____ distinct grades.

38. Potash lead glass is also known as ____.

39. What is the maximum percentage of water absorbed by a second class brick when soaked in water about 24 hours?

40. Wire cut bricks are made in ____.

41. 1 Cent = ___ saft

42. What is the reason of the timber defect named 'blue stain'?

43. Height of the slump cone is ___.

44. In type B the height of a capital letter is 4 mm. What is the dimension in mm for spacing between characters?

45. Type B lines represent ____ lines.

46. The T-Square with the working edge length of 1000±10 mm, is designated as ____.

47. What is the length to width ratio of the A2 drawing paper?

48. Scales having same R.F but graduated to read different units are known as ______.

49. Both external and internal details are shown in one view is _____.

50. In cabinet oblique projection, the angle between the plane of projection and the line of projection is ____.

51. Isometric view will be _____ % larger than the isometric projection.

52. A solid having twelve equal and regular pentagons is called _____.

53. A straight line having 2 cm length is placed parallel to V.P. and is inclined at 45" to H.P, the length of elevation view is ____.

54. The usual method adopted for representing scale on map is ______.

55. The error in measured length due to bad ranging is ____.

56. At magnetic poles dip of a magnetic needle is ______.

57. When 1 cm on a map represents 20 m on the ground, the representative fraction of the scale is

58. The principle of working of optical square is based upon _____.

59. In which system, the bearing of a line is measured with magnetic north in clockwise direction?

60. The top width of the embankment of road is called ____.

61. The difference in levels of the outer and inner edges of a road along the curves is called ___.

62. The widening of road is not required when its radius will be ____.

63. The circular isolated depressions formed on a road surface

64. When a rising grade meets with a horizontal road, the type of curve adopted to connect them is called

65. Width of ballast section for Broad Gauge is

66. The tread of wheels is provided an outward slope of

67. The side slope of embankments for a railway track is generally taken as

68. The minimum size of rainwater pipe shall be _____.

69. The effect produced by the elevation and general planning of a building is known as ____

70. Site plan as per N.B.C 1970 should be drawn to a scale of not less than ______.

71. Usual minimum size of service pipe for domestic water supply is ____.

72. As per N.B.C the minimum area of bath and WC is ______.

73. Shear reinforcement in R.C.C is provided to resist

74. A slab supported along two sides is called ____.

75. In two way slab, each side of the square mesh in length should be _____.

76. Adding a thin layer of cement mortar to the surface of concrete

77. In two way slab the reinforcements in the shorter span are ____ in the longer span.

78. A channel aligned nearly parallel to the contours of the country is called ____.

79. The ratio of the actually irrigated area during a year or during a crop to the culturable irrigable area

80. A closed conduit or pipe for supplying water under pressure to a turbine

81. The multiplying factor for painting in flush door for both sides is ____.

82. In calculating the quantity of brick work no deduction shall be for the opening up to ____.

83. 10°C is equal to ____.

84. The ratio of load lifted to effort applied is known as _____.

85. A material which can be drawn in to fine wires is known as _____.

86. The ability of material to resist deformation is called _____.

87. The minimum width of septic tank is taken

88. The minimum diameter of a sewer pipe should be _______.

89. As per I.S: 456-2000, the minimum diameter of main bars in R.C.C columns should be ____.

90. The main function of the drier in painting is to _____.

91. Thinner in plastic emulsion paint is ____.

92. Oblique perspective is used to present ______.

93. Springers are those voussoirs of an arch which are provided at _____.

94. Which line type is available when you start a new drawing in AutoCAD?

95. To switch isoplanes, you press

96. Which command do you use to draw a circle in isometric drafting?

97. The Design Center is

98. Which is the short key of line?

99. The most accurate method of plane tabling is ____.